RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 3/4 in.-16 right hand threads on the shank, and a 1.600 in. mounting width ball with a .625 in. thru bolt hole. Finished in gold zinc plating.

RockJocks CNC machined billet black delrin bushing for CE-9900 Antirock front sway bar kit that supports the sway bar its self into the frame of the Jeep TJ and LJ.

This Part Fits:

Year	Make	Model	Submodel
2006	Jeep	Wrangler	65th Anniversary Edition
2003-2006	Jeep	Wrangler	Rubicon
1997-2004	Jeep	Wrangler	Sahara
1997-2006	Jeep	Wrangler	SE
1997-2006	Jeep	Wrangler	Sport
2004-2006	Jeep	Wrangler	Unlimited
2005-2006	Jeep	Wrangler	Unlimited Rubicon
2002-2006	Jeep	Wrangler	X

RockJocks Johnny Joint lower control arms for TJ Wrangler and LJ Unlimited vehicles as well as all years of XJ Cherokee, MJ Comanche and ZJ Grand Cherokee vehicles provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift. Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are made from 1 in. x .156 in. wall DOM tubing, feature a Johnny Joint rod end at both ends for maximum articulation, are powder coated semi-gloss black, and include zerk fitted grade 8 mounting bolts.

This Part Fits:

Year	Make	Model	Submodel
1984-1993	Jeep	Cherokee	Base
1991-1992	Jeep	Cherokee	Briarwood
1985-1988	Jeep	Cherokee	Chief
1996,1998-2001	Jeep	Cherokee	Classic
1993-1997	Jeep	Cherokee	Country
1985-1992	Jeep	Cherokee	Laredo
1987-1992,1998-2001	Jeep	Cherokee	Limited
1985-1990	Jeep	Cherokee	Pioneer
1994-2001	Jeep	Cherokee	SE
1989-2001	Jeep	Cherokee	Sport
1987-1992	Jeep	Comanche	Base
1987-1988	Jeep	Comanche	Chief
1986	Jeep	Comanche	Custom
1988-1992	Jeep	Comanche	Eliminator
1987-1988	Jeep	Comanche	Laredo
1987-1992	Jeep	Comanche	Pioneer
1986	Jeep	Comanche	X
1986	Jeep	Comanche	XLS
1998	Jeep	Grand Cherokee	5.9 Limited
1993	Jeep	Grand Cherokee	Base
1993-1998	Jeep	Grand Cherokee	Laredo
1993-1998	Jeep	Grand Cherokee	Limited
1995,1997	Jeep	Grand Cherokee	Orvis
1994-1995	Jeep	Grand Cherokee	SE
1997-1998	Jeep	Grand Cherokee	TSi
2006	Jeep	Wrangler	65th Anniversary Edition
2003-2006	Jeep	Wrangler	Rubicon
1997-2004	Jeep	Wrangler	Sahara
1997-2006	Jeep	Wrangler	SE
1997-2006	Jeep	Wrangler	Sport
2004-2006	Jeep	Wrangler	Unlimited
2005-2006	Jeep	Wrangler	Unlimited Rubicon

RockJocks Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles has been a staple in the off-road hobby for over 2 decades! Features include a 1 1/4 in. diameter forged alloy drag link, and 1 1/4 in. solid alloy steel tie rod bar that is bored and threaded on the ends, all threaded tie rod ends with massive threads and grease boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4 in. of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 in. bump stop, over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.

This Part Fits:

Year	Make	Model	Submodel
1984-1993	Jeep	Cherokee	Base
1991-1992	Jeep	Cherokee	Briarwood
1985-1988	Jeep	Cherokee	Chief
1996,1998-2001	Jeep	Cherokee	Classic
1993-1997	Jeep	Cherokee	Country
1985-1992	Jeep	Cherokee	Laredo
1987-1992,1998-2001	Jeep	Cherokee	Limited
1985-1990	Jeep	Cherokee	Pioneer
1994-2001	Jeep	Cherokee	SE
1989-2001	Jeep	Cherokee	Sport
1987-1992	Jeep	Comanche	Base
1987-1988	Jeep	Comanche	Chief
1986	Jeep	Comanche	Custom
1988-1992	Jeep	Comanche	Eliminator
1987-1988	Jeep	Comanche	Laredo
1987-1992	Jeep	Comanche	Pioneer
1986	Jeep	Comanche	X
1986	Jeep	Comanche	XLS
1998	Jeep	Grand Cherokee	5.9 Limited
1993	Jeep	Grand Cherokee	Base
1993-1998	Jeep	Grand Cherokee	Laredo
1993-1998	Jeep	Grand Cherokee	Limited
1995,1997	Jeep	Grand Cherokee	Orvis
1994-1995	Jeep	Grand Cherokee	SE
1997-1998	Jeep	Grand Cherokee	TSi
2006	Jeep	Wrangler	65th Anniversary Edition
2003-2006	Jeep	Wrangler	Rubicon
1997-2004	Jeep	Wrangler	Sahara
1997-2006	Jeep	Wrangler	SE
1997-2006	Jeep	Wrangler	Sport
2004-2006	Jeep	Wrangler	Unlimited
2005-2006	Jeep	Wrangler	Unlimited Rubicon
2002-2006	Jeep	Wrangler	X

RockJocks right hand thread forged alloy steel tie rod end for their CE-9701 Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync steering - this is the tie rod end with the zerk fitting on the back of the cap that goes on the drivers side of the vehicle! This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.

This Part Fits:

Year	Make	Model	Submodel
1984-1993	Jeep	Cherokee	Base
1991-1992	Jeep	Cherokee	Briarwood
1985-1988	Jeep	Cherokee	Chief
1996,1998-2001	Jeep	Cherokee	Classic
1993-1997	Jeep	Cherokee	Country
1985-1992	Jeep	Cherokee	Laredo
1987-1992,1998-2001	Jeep	Cherokee	Limited
1985-1990	Jeep	Cherokee	Pioneer
1994-2001	Jeep	Cherokee	SE
1989-2001	Jeep	Cherokee	Sport
1987-1992	Jeep	Comanche	Base
1987-1988	Jeep	Comanche	Chief
1986	Jeep	Comanche	Custom
1988-1992	Jeep	Comanche	Eliminator
1987-1988	Jeep	Comanche	Laredo
1987-1992	Jeep	Comanche	Pioneer
1986	Jeep	Comanche	X
1986	Jeep	Comanche	XLS
1998	Jeep	Grand Cherokee	5.9 Limited
1993	Jeep	Grand Cherokee	Base
1993-1998	Jeep	Grand Cherokee	Laredo
1993-1998	Jeep	Grand Cherokee	Limited
1995,1997	Jeep	Grand Cherokee	Orvis
1994-1995	Jeep	Grand Cherokee	SE
1997-1998	Jeep	Grand Cherokee	TSi
2006	Jeep	Wrangler	65th Anniversary Edition
2003-2006	Jeep	Wrangler	Rubicon
1997-2004	Jeep	Wrangler	Sahara
1997-2006	Jeep	Wrangler	SE
1997-2006	Jeep	Wrangler	Sport
2004-2006	Jeep	Wrangler	Unlimited
2005-2006	Jeep	Wrangler	Unlimited Rubicon
2002-2006	Jeep	Wrangler	X

RockJocks Antirock front sway bar kit for Jeep XJ Cherokees and Jeep MJ Comanches provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, forged 4140 chomoly arms, billet aluminum sway bar mounting brackets, bushings, hardware, and step-by-step instructions. The billet aluminum sway bar mounting brackets bolt into the factory sway bar mounting holes under the front frame rails and the sway bar links attach to the stock mounts on the differential housing. The RockJock Antirock sway bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.

This Part Fits:

Year	Make	Model	Submodel
1987-1993	Jeep	Cherokee	Base
1991-1992	Jeep	Cherokee	Briarwood
1987-1988	Jeep	Cherokee	Chief
1996,1998-2001	Jeep	Cherokee	Classic
1993-1997	Jeep	Cherokee	Country
1987-1992	Jeep	Cherokee	Laredo
1987-1992,1998-2001	Jeep	Cherokee	Limited
1987-1990	Jeep	Cherokee	Pioneer
1994-2001	Jeep	Cherokee	SE
1989-2001	Jeep	Cherokee	Sport
1987-1992	Jeep	Comanche	Base
1987-1988	Jeep	Comanche	Chief
1986	Jeep	Comanche	Custom
1988-1992	Jeep	Comanche	Eliminator
1987-1988	Jeep	Comanche	Laredo
1987-1992	Jeep	Comanche	Pioneer
1986	Jeep	Comanche	X
1986	Jeep	Comanche	XLS

Upgrade or replace worn ball joints on SPC Performance Adjustable Upper Control Arms with these modern architecture, maintenance-free, adjustable units. Designed, engineered and assembled in Colorado, these next generation ball joints are the result of a relentless pursuit of product performance and longevity. These ball joints are reverse compatible and a direct replacement for the SPC upper control arm sets. Replaces Ball Joint on SPC Arms - 25675, 25680

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Ford	Expedition	Eddie Bauer
2007-2010	Ford	Expedition	EL Eddie Bauer
2008-2017	Ford	Expedition	EL King Ranch
2007-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2011-2017	Ford	Expedition	EL XL
2007-2017	Ford	Expedition	EL XLT
2008	Ford	Expedition	Funkmaster Flex Edition
2008-2017	Ford	Expedition	King Ranch
2007-2017	Ford	Expedition	Limited
2015-2017	Ford	Expedition	Platinum
2016-2017	Ford	Expedition	SSV
2011-2017	Ford	Expedition	XL
2007-2017	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2018,2020	Ford	F-150	King Ranch
2004-2018,2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2018,2020	Ford	F-150	Limited
2009-2018,2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2018,2020	Ford	F-150	XL
2004-2018,2020	Ford	F-150	XLT
2004	Ford	F-150 Heritage	SVT Lightning
2004	Ford	F-150 Heritage	XL
2004	Ford	F-150 Heritage	XLT
2006-2008	Lincoln	Mark LT	Base
2008-2015	Lincoln	Navigator	Base
2008-2015	Lincoln	Navigator	L
2007	Lincoln	Navigator	L Luxury
2016-2017	Lincoln	Navigator	L Reserve
2016-2017	Lincoln	Navigator	L Select
2007	Lincoln	Navigator	L Ultimate
2007	Lincoln	Navigator	Luxury
2016-2017	Lincoln	Navigator	Reserve
2016-2017	Lincoln	Navigator	Select
2007	Lincoln	Navigator	Ultimate

Designed specifically for the S2000, this ball joint corrects camber on both the front and rear. An O.E. quality ball joint, this adjustable part corrects camber up to +/-1.5deg. NOTE: This ball joint is ONLY for vehicles equipped with 17" rims or larger.California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2000-2009	Honda	S2000	Base
2008-2009	Honda	S2000	CR

Fully adjust camber and toe on the rear suspension of your Subaru Outback, Legacy or Baja with this two arm kit from SPC. This kit offers a full +-2.5deg of camber and toe change so you can get back to factory alignment specifications. Whether you need to adjust for ride height changes, prepare for the track, or correct for suspension wear, this kit will provide maximum suspension adjustability. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2006-2009	Subaru	Legacy	2.5i
2007-2009	Subaru	Legacy	2.5i Limited
2007-2009	Subaru	Legacy	2.5i Special Edition
2009	Subaru	Legacy	3.0 R
2008-2009	Subaru	Legacy	3.0 R Limited
2000	Subaru	Legacy	Brighton
2000-2006	Subaru	Legacy	GT
2000-2002,2005,2007-2009	Subaru	Legacy	GT Limited
2006-2009	Subaru	Legacy	GT spec.B
2005	Subaru	Legacy	i
2000-2004	Subaru	Legacy	L
2004	Subaru	Legacy	L 35th Anniversary
2003	Subaru	Legacy	L SE
2005	Subaru	Legacy	Limited
2006-2009	Subaru	Outback	2.5i
2007	Subaru	Outback	2.5i Basic
2008	Subaru	Outback	2.5i L.L. Bean Edition
2006-2009	Subaru	Outback	2.5i Limited
2008	Subaru	Outback	2.5i Limited L.L. Bean Edition
2009	Subaru	Outback	2.5i Special Edition
2009	Subaru	Outback	3.0 R Limited
2000-2004,2008	Subaru	Outback	Base
2002-2004	Subaru	Outback	H6
2004	Subaru	Outback	H6 35th Anniversary Edition
2004	Subaru	Outback	H6 VDC
2005	Subaru	Outback	i
2001-2004	Subaru	Outback	L.L. Bean
2000-2005	Subaru	Outback	Limited
2005-2006	Subaru	Outback	R
2005-2008	Subaru	Outback	R L.L. Bean Edition
2006	Subaru	Outback	R VDC Limited
2001-2003	Subaru	Outback	VDC
2005	Subaru	Outback	VDC Limited
2005-2006	Subaru	Outback	XT
2005-2009	Subaru	Outback	XT Limited

This EZ Arm corrects rear camber on Honda's redesigned 2001 - 2005 Civic along with the 2002 - 07 Acura RSX. Simply replace the O.E. arm with this arm, perfect for stock height and lowered vehicles. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2002-2006	Acura	RSX	Base
2002-2006	Acura	RSX	Type-S
2001-2005	Honda	Civic	DX
2001-2005	Honda	Civic	EX
2005	Honda	Civic	EX Special Edition
2001-2005	Honda	Civic	GX
2001-2005	Honda	Civic	HX
2003-2005	Honda	Civic	Hybrid
2001-2005	Honda	Civic	LX
2005	Honda	Civic	LX Special Edition
2002-2005	Honda	Civic	Si
2004-2005	Honda	Civic	Value Package

Designed specifically for the Lexus GS & IS, this ball joint corrects camber up to +-1.5deg. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2001-2005	Lexus	IS300	Base
2002-2005	Lexus	IS300	Sportcross

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

This popular adjustable upper control arm/shim kit has been re-designed to match the SPC family of Nissan and Infiniti arms. Our new tubular design has reduced weight by 1 pound per arm and increased rigidity. SPC's arms are the only 350Z arms on the market that can get +3.5deg to -1.5deg camber change. Additionally, you will be able to set your caster at +-1.0deg. This patented design makes camber and caster adjustment easy using the sliding and rotating ball joint. The kit includes everything needed, including the ABS sensor bracket, shims, and the adjustable arms. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2003-2007	INFINITI	G35	Base
2007	INFINITI	G35	Journey
2007	INFINITI	G35	Sport
2004-2007	INFINITI	G35	X
2005	Nissan	350Z	35th Anniversary Edition
2003-2008	Nissan	350Z	Base
2003-2008	Nissan	350Z	Enthusiast
2005-2008	Nissan	350Z	Grand Touring
2007-2008	Nissan	350Z	Nismo
2003-2005	Nissan	350Z	Performance
2003-2008	Nissan	350Z	Touring
2003-2006	Nissan	350Z	Track

This pair of patent pending adjustable front upper control arms will give +-4deg camber and +-4deg caster change. SPC arms match the OE design for clearance so you can get up to +2deg camber change without fender well interference. If more positive change is needed use the included +2deg camber shims for fixed change and dial in the rest with your arms. The rubber isolated xAxis sealed flex joints retain OE bushing values (Noise, Vibration, and Harshness - NVH), while providing the handling qualities of a mono-ball. Optimized geometry and high strength forged steel components make this the strongest adjustable arm on the market today. Whether you want a cambered stance, improved handling, or to minimize tire wear, this is the best arm for you. US Patent # US 2016/0059652 A1 California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2003-2007	INFINITI	G35	Base
2007	INFINITI	G35	Journey
2007	INFINITI	G35	Sport
2004-2007	INFINITI	G35	X
2005	Nissan	350Z	35th Anniversary Edition
2003-2008	Nissan	350Z	Base
2003-2008	Nissan	350Z	Enthusiast
2005-2008	Nissan	350Z	Grand Touring
2007-2008	Nissan	350Z	Nismo
2003-2005	Nissan	350Z	Performance
2003-2008	Nissan	350Z	Touring
2003-2006	Nissan	350Z	Track

For many Hondas and Acuras, these arms have an O.E. style ball joint integrated into a copmlete arm assembly and they have a full 6 degree range of rear camber change with our turnbuckle adjustment system. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2004-2008	Acura	TL	Base
2007-2008	Acura	TL	Type-S

Restore lost caster and camber on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or, use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of arms feature: A patented adjustable ball joint design to dial in Caster and Camber +/-3.0deg. Fully forged steel contruction for maximum strength. Upgraded greasable ball joints. SpecRide bushings with free pivot for extended travel while maintaining factory standards for noise, vibration, and harshness (NVH). On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2004-2013	INFINITI	QX56	Base
2014-2018	INFINITI	QX80	Base
2016-2017,2019-2020	INFINITI	QX80	Limited
2019-2024	INFINITI	QX80	Luxe
2021-2024	INFINITI	QX80	Premium Select
2021-2024	INFINITI	QX80	Sensory
2005-2009	Nissan	Armada	LE
2021-2024	Nissan	Armada	Midnight Edition
2010-2015,2017-2024	Nissan	Armada	Platinum
2018-2020	Nissan	Armada	Platinum Reserve
2021-2023	Nissan	Armada	S
2005-2010	Nissan	Armada	SE
2005-2006	Nissan	Armada	SE Off-Road
2011-2015,2017-2024	Nissan	Armada	SL
2011-2015,2017-2024	Nissan	Armada	SV
2010	Nissan	Armada	Titanium
2004-2010	Nissan	TITAN	LE
2017-2024	Nissan	TITAN	Platinum Reserve
2008-2015,2017-2024	Nissan	TITAN	PRO-4X
2011-2015,2017-2023	Nissan	TITAN	S
2004-2010	Nissan	TITAN	SE
2011-2015,2017-2021	Nissan	TITAN	SL
2011-2015,2017-2024	Nissan	TITAN	SV
2004-2010	Nissan	TITAN	XE

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring an upgraded greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80deg of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop travel. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's patented ball joint design will get you +-2deg of caster and +-2deg of camber, beyond what the truck's lower slots provide, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Also consider SPC #86252 with upgraded bolts and adjustmentplates to lock in your alignment and prevent bolt slip on the lower control arm. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Ford	Expedition	Eddie Bauer
2007-2010	Ford	Expedition	EL Eddie Bauer
2008-2017	Ford	Expedition	EL King Ranch
2007-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2011-2017	Ford	Expedition	EL XL
2007-2017	Ford	Expedition	EL XLT
2008	Ford	Expedition	Funkmaster Flex Edition
2008-2017	Ford	Expedition	King Ranch
2007-2017	Ford	Expedition	Limited
2015-2017	Ford	Expedition	Platinum
2016-2017	Ford	Expedition	SSV
2011-2017	Ford	Expedition	XL
2007-2017	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2020	Ford	F-150	King Ranch
2004-2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2020	Ford	F-150	XL
2004-2020	Ford	F-150	XLT
2004	Ford	F-150 Heritage	SVT Lightning
2004	Ford	F-150 Heritage	XL
2004	Ford	F-150 Heritage	XLT
2006-2008	Lincoln	Mark LT	Base
2008-2015	Lincoln	Navigator	Base
2008-2015	Lincoln	Navigator	L
2007	Lincoln	Navigator	L Luxury
2016-2017	Lincoln	Navigator	L Reserve
2016-2017	Lincoln	Navigator	L Select
2007	Lincoln	Navigator	L Ultimate
2007	Lincoln	Navigator	Luxury
2016-2017	Lincoln	Navigator	Reserve
2016-2017	Lincoln	Navigator	Select
2007	Lincoln	Navigator	Ultimate

Restore drivability on lowered 2004-2020 Ford F150 trucks with SPC's control arms. These arms give +-2.0deg of camber and -1.0deg to +3.0deg of caster adjustability while also giving more ball joint articulation on trucks lowered up to 2.5". Featuring an upgraded greasable ball joint and rubber isolated xAxis bushings, these arms are designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80deg of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop and compression travel. Get your drivability and tracking back: When you lower your truck you affect caster and camber. SPC's arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you +-2.0deg of camber and -1.0deg to 3.0deg of caster, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p/n 86250, adjustable cam nut/bracket or 86252, HD cam bolt assemblies. NOTE: These arms are designed specifically for trucks lowered up to 2.5". For lifted trucks check out part number 25680 instead. Patent NO. US 7,513,514

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Ford	Expedition	Eddie Bauer
2007-2010	Ford	Expedition	EL Eddie Bauer
2008-2017	Ford	Expedition	EL King Ranch
2007-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2011-2017	Ford	Expedition	EL XL
2007-2017	Ford	Expedition	EL XLT
2008	Ford	Expedition	Funkmaster Flex Edition
2008-2017	Ford	Expedition	King Ranch
2007-2017	Ford	Expedition	Limited
2015-2017	Ford	Expedition	Platinum
2016-2017	Ford	Expedition	SSV
2011-2017	Ford	Expedition	XL
2007-2017	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2020	Ford	F-150	King Ranch
2004-2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2020	Ford	F-150	XL
2004-2020	Ford	F-150	XLT
2004	Ford	F-150 Heritage	SVT Lightning
2004	Ford	F-150 Heritage	XL
2004	Ford	F-150 Heritage	XLT
2006-2008	Lincoln	Mark LT	Base
2008-2015	Lincoln	Navigator	Base
2008-2015	Lincoln	Navigator	L
2007	Lincoln	Navigator	L Luxury
2016-2017	Lincoln	Navigator	L Reserve
2016-2017	Lincoln	Navigator	L Select
2007	Lincoln	Navigator	L Ultimate
2007	Lincoln	Navigator	Luxury
2016-2017	Lincoln	Navigator	Reserve
2016-2017	Lincoln	Navigator	Select
2007	Lincoln	Navigator	Ultimate

Replace your worn out upper ball joints on the rear suspension on many Ford, Lincoln, and Mercury AWD vehicles with these replacement ball joints from SPC. Ford makes you buy the whole knuckle to replace this joint, but you can save time and money by simply replacing the ball joint instead. Need camber adjustment as well? Check out SPC p/n 67690 for a camber adjustment ball joint that offers +-1.25deg of change. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2005-2007	Ford	Five Hundred	Limited
2005-2006	Ford	Five Hundred	SE
2005-2007	Ford	Five Hundred	SEL
2005-2007	Ford	Freestyle	Limited
2005-2006	Ford	Freestyle	SE
2005-2007	Ford	Freestyle	SEL
2008-2009	Ford	Taurus	Limited
2009	Ford	Taurus	SE
2008-2009	Ford	Taurus	SEL
2008-2009	Ford	Taurus X	Eddie Bauer
2008-2009	Ford	Taurus X	Limited
2008-2009	Ford	Taurus X	SEL
2005-2007	Mercury	Montego	Luxury
2005-2007	Mercury	Montego	Premier
2008-2009	Mercury	Sable	Base
2008-2009	Mercury	Sable	Premier

These adjustable rear upper control arms, for the 2009 & up Honda Pilot delivers 6deg of camber change. The adjustable arm has OE style balljoint and bushing making it an ideal piece for both collision repair and traditional alignment needs. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2005-2017	Honda	Odyssey	EX
2005-2017	Honda	Odyssey	EX-L
2005-2017	Honda	Odyssey	LX
2016-2017	Honda	Odyssey	SE
2005-2017	Honda	Odyssey	Touring
2011-2017	Honda	Odyssey	Touring Elite

Add camber adjustment to your lifted Jeep Grand Cherokee or Commander with the highest quality ball joint on the market! This joint is specifically designed to work with raised suspensions and features: *Induction hardened and oversized 18mm stud for extreme strength and high durability *700 hour salt spray resistant coating for long life *Hybrid 2-piece race and internal spring compensate for wear over time *Fully sealed greasable design to protect from the elements *80deg of articulation to maximize travel without binding vs 66deg on the factory joint. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2006	Jeep	Commander	65th Anniversary Edition
2006-2007	Jeep	Commander	Base
2006-2010	Jeep	Commander	Limited
2007-2009	Jeep	Commander	Overland
2007-2010	Jeep	Commander	Sport
2006	Jeep	Grand Cherokee	65th Anniversary Edition
2005-2010	Jeep	Grand Cherokee	Laredo
2005-2010	Jeep	Grand Cherokee	Limited
2006-2009	Jeep	Grand Cherokee	Overland
2006-2010	Jeep	Grand Cherokee	SRT8

This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides +-1.25deg. This factory change is not enough change for lowered applications. By increasing the length of the rear upper control arm SPC Performance adds 2deg positive camber to the rear suspension that can then be dialed in with the OEM cam bolt. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2005-2010	Scion	tC	Base
2007-2008	Scion	tC	Spec

Get your 8th and 9th generation Civic or Acura CSX & ILX track ready with SPC's forged aluminum adjustable rear camber arm. SPC forged aircraft grade aluminum arm weighs less than the OE arm it will replace. The arm is built with SPC's xAxis sealed flexjoint to reduce compliance. Its' unique adjustment design permits on car adjustment of +-3deg camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications after lowering, this is the arm for you. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2013-2022	Acura	ILX	Base
2013-2014	Acura	ILX	Hybrid
2006-2012	Honda	Civic	DX
2006-2015	Honda	Civic	EX
2009-2015	Honda	Civic	EX-L
2006-2012	Honda	Civic	GX
2012-2015	Honda	Civic	HF
2006-2015	Honda	Civic	Hybrid
2009-2015	Honda	Civic	Hybrid-L
2006-2015	Honda	Civic	LX
2009-2011	Honda	Civic	LX-S
2008	Honda	Civic	MUGEN Si
2013-2015	Honda	Civic	Natural Gas
2015	Honda	Civic	SE
2006-2015	Honda	Civic	Si

These arms fit popular CR-Vs. By removing the stock upper rear control arm and replacing it with the adjustable arm you can adjust camber either positive or negative with the turnbuckle adjuster. This arm can be used on vehicles with stock ride height or vehicles that have been altered for performance. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2007-2016	Honda	CR-V	EX
2007-2016	Honda	CR-V	EX-L
2007-2016	Honda	CR-V	LX
2011,2016	Honda	CR-V	SE
2015-2016	Honda	CR-V	Touring