Mishimoto has developed a performance air intake engineered specifically for the 2015+ Subaru WRX. The intake features numerous innovative components, including a wire-reinforced lower induction hose that will not collapse under suction and boost. Dyno testing showed maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake is optionally available with an enclosed airbox for protection against engine bay heat-soak, and it provides a stock-like engine bay appearance as well. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. Made in the USA and available with either polished, wrinkle black, or wrinkle red aluminum intake piping, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2015-2021	Subaru	WRX	Base
2015-2021	Subaru	WRX	Limited
2015-2021	Subaru	WRX	Premium

Add some horsepower to your 2015-2017 STI with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2015-2017 Subaru STI and includes everything needed to replace the restrictive stock airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 20 whp/18 wtq gains over the stock intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru 2015-2017 STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. A rubber cap is provided to place over the sound symposer housing. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Subaru WRX/STI Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty

This Part Fits:

Year	Make	Model	Submodel
2015-2017	Subaru	WRX STI	Base
2015	Subaru	WRX STI	Launch Edition
2015-2017	Subaru	WRX STI	Limited
2016	Subaru	WRX STI	Series.HyperBlue

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports with a silicone PCV adapter. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!

This Part Fits:

Year	Make	Model	Submodel
2016-2019	Ford	Fiesta	ST

Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports with a silicone PCV adapter. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!

This Part Fits:

Year	Make	Model	Submodel
2016-2019	Ford	Fiesta	ST

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2017-2021	Honda	Civic	EX
2016-2021	Honda	Civic	EX-L
2016-2018	Honda	Civic	EX-T
2017-2021	Honda	Civic	LX
2017-2021	Honda	Civic	Sport
2017-2021	Honda	Civic	Sport Touring
2016-2021	Honda	Civic	Touring

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2017-2021	Honda	Civic	EX
2016-2021	Honda	Civic	EX-L
2016-2018	Honda	Civic	EX-T
2017-2021	Honda	Civic	LX
2017-2021	Honda	Civic	Sport
2017-2021	Honda	Civic	Sport Touring
2016-2021	Honda	Civic	Touring

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2017-2021	Honda	Civic	EX
2016-2021	Honda	Civic	EX-L
2016-2018	Honda	Civic	EX-T
2017-2021	Honda	Civic	LX
2017-2021	Honda	Civic	Sport
2017-2021	Honda	Civic	Sport Touring
2016-2021	Honda	Civic	Touring

Our engineers have put a lot of RandD hours into the Mishimoto Performance Intake for the 2016-2024 Chevy Camaro 2.0T. We went through several designs to get to where we are now, and this will truly wake up your LGT motor with the help of extra air surging through your system. This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 21hp and 18ft-lbs of torque. We also improved pressure drop by over 40-percent, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while our MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay. The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. We performed hundreds of miles of road testing to ensure the safety of running it on a completely stock motor, so no tune is required! This kit comes with everything required for installation, along with a pre-oiled Mishimoto Performance Air Filter, the necessary hardware and our Mishimoto Lifetime Warranty. Check out our engineering blog for in-depth details on the design!

This Part Fits:

Year	Make	Model	Submodel
2017-2023	Chevrolet	Camaro	LS
2016-2023	Chevrolet	Camaro	LT

Ford has finally graced our American shores with a Focus wielding the RS badge, and we couldn't be happier. We wanted to improve and upgrade a lot of things on this car and among those priorities had to be an intake. Our engineers have spent many hours in development, performing a plethora of tests and data collection. This Is a full intake, replacing every core component in the OEM system including the airbox and the intake pipe. Our kit includes a 3in, aluminum pipe that routes all the way to the turbo, with all of the necessary bracketry to accommodate a perfect fit.The airbox has a similar design to the stock airbox, facilitating an improvemed pressure drop with an open top, exposing the filter to more air and sealing the box against the hood, keeping it fully enclosed. This airbox uses the factory air inlet ducts, grabbing air right from the front of the car and the ports are surrounded with weather stripping to avoid movement. We have put this intake through hundreds of miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 12 hp and 15 ft-lbs of torque that is safe on a stock tune. Look at our engineering blog for details below! No cutting or modification to factory components will be necessary, this kit is a direct bolt in for the 2016-2018 Ford FocusRS and of course, this product is covered with the Mishimoto Lifetime Warranty

This Part Fits:

Year	Make	Model	Submodel
2016-2018	Ford	Focus	RS

The Mazda Miata is known as the ultimate driver's car. It's designed to be light and nimble, making for a rewarding driving experience. The Mishimoto 2016-2021 Miata intake creates a sound that enhances this driving experience even more while looking amazing in your engine bay. The Miata air intake pipe is available in a polished, wrinkle black, or wrinkle red finish to match whatever style you're going for. To keep with the lightweight mentality, this 2016-2021 Miata intake features an aluminum airbox to save on weight. The stock intake duct is utilized to supply cold air to the intake filter, while the CNC-machined MAF housing makes for accurate sensor readings. This ND Miata air intake features a high-flow filter to let your engine breathe, as you rip down back roads with the gas pedal mashed to the floor. As with all our 2016-2021 Miata parts, the Mishimoto Lifetime Warranty ensures high-quality parts and performance for the life of your Miata intake.

This Part Fits:

Year	Make	Model	Submodel
2020	Mazda	MX-5 Miata	100th Anniversary Special Edition
2016-2021	Mazda	MX-5 Miata	Club
2016-2021	Mazda	MX-5 Miata	Grand Touring
2020	Mazda	MX-5 Miata	RF 100th Anniversary Special Edition
2017-2021	Mazda	MX-5 Miata	RF Club
2017-2021	Mazda	MX-5 Miata	RF Grand Touring
2016-2021	Mazda	MX-5 Miata	Sport

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response - plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2017-2020	Honda	Civic	Si

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2017-2020	Honda	Civic	Si

Give your 2018-2022 Honda Accord 2.0T the attitude it deserves with the Mishimoto Performance Air Intake. Honda might have left the V6 in history with the 10th generation Accord, but in It's place sits the de-tuned version of the Civic Type R?s powerplant. Where Honda designed the Accord to be a quiet and comfortable daily driver, some might want a little extra hiss and growl from their turbocharged Accord. Lucky for you, Mishimoto is here to deliver. The Mishimoto Performance Air Intake for your 2.0T Accord alleviates the restrictions and mufflers put in place by Honda's engineers, starting with our precision-adjusted MAF housing. CNC-machined from high-grade aluminum, our MAF housing in tandem with our silicone coupler creates a better flow for intake air while still maintaining safe air-fuel ratios. Our kit also features a Mishimoto high-flow oiled air filter incased in a robust rotational-molded airbox to keep out unwanted engine bay heat. Our airbox is topped with a sheet of carbon-fiber to give a boost to your Accord's engine bay aesthetic. Coupled together, our improvements to the 2.0T?s intake system give the Accord a much needed attitude adjustment. On top of the added aggressive engine tone, our intake improves flow by 50-percent, as well as providing max power gains of 15.6 horsepower and 12.9 torque to the wheels. The Mishimoto 2018-2022 Honda Accord 2.0T Performance Air Intake also includes the Mishimoto Lifetime Warranty for a worry-free installation.

This Part Fits:

Year	Make	Model	Submodel
2018-2020	Honda	Accord	EX-L
2018-2022	Honda	Accord	Sport
2018-2022	Honda	Accord	Touring

 Designed with both function and style in mind, the Mishimoto Racing Tow Hook for the 2022+ Subaru WRX/2018+ Crosstrek is constructed from high-strength 7075 aluminum and 304 stainless-steel. Available in 6 vibrant color options, and powder coated for maximum durability, there is an option to match everyone’s style. With function being a major focus of the design, we opted for a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, allowing it to meet or exceed requirements for racing series’ such as SCCA, NASA, and CCA. We even include tow hook indication arrow stickers! Whether you’re building your 2022+ Subaru WRX/2018+ Crosstrek for street, show, drag racing, auto-x, or road racing, a quality, functional, and stylish tow hook is a must-have! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.

This Part Fits:

Year	Make	Model	Submodel
2018-2024	Subaru	Crosstrek	Base
2019-2023	Subaru	Crosstrek	Hybrid
2018-2025	Subaru	Crosstrek	Limited
2018-2025	Subaru	Crosstrek	Premium
2021-2025	Subaru	Crosstrek	Sport
2024-2025	Subaru	Crosstrek	Wilderness
2022-2024	Subaru	WRX	Base
2022-2024	Subaru	WRX	GT
2022-2024	Subaru	WRX	Limited
2022-2024	Subaru	WRX	Premium
2024	Subaru	WRX	TR

 Designed with both function and style in mind, the Mishimoto Racing Tow Hook for the 2022+ Subaru WRX/2018+ Crosstrek is constructed from high-strength 7075 aluminum and 304 stainless-steel. Available in 6 vibrant color options, and powder coated for maximum durability, there is an option to match everyone’s style. With function being a major focus of the design, we opted for a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, allowing it to meet or exceed requirements for racing series’ such as SCCA, NASA, and CCA. We even include tow hook indication arrow stickers! Whether you’re building your 2022+ Subaru WRX/2018+ Crosstrek for street, show, drag racing, auto-x, or road racing, a quality, functional, and stylish tow hook is a must-have! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.

This Part Fits:

Year	Make	Model	Submodel
2018-2024	Subaru	Crosstrek	Base
2019-2023	Subaru	Crosstrek	Hybrid
2018-2025	Subaru	Crosstrek	Limited
2018-2025	Subaru	Crosstrek	Premium
2021-2025	Subaru	Crosstrek	Sport
2024-2025	Subaru	Crosstrek	Wilderness
2022-2024	Subaru	WRX	Base
2022-2024	Subaru	WRX	GT
2022-2024	Subaru	WRX	Limited
2022-2024	Subaru	WRX	Premium
2024	Subaru	WRX	TR

 Designed with both function and style in mind, the Mishimoto Racing Tow Hook for the 2022+ Subaru WRX/2018+ Crosstrek is constructed from high-strength 7075 aluminum and 304 stainless-steel. Available in 6 vibrant color options, and powder coated for maximum durability, there is an option to match everyone’s style. With function being a major focus of the design, we opted for a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, allowing it to meet or exceed requirements for racing series’ such as SCCA, NASA, and CCA. We even include tow hook indication arrow stickers! Whether you’re building your 2022+ Subaru WRX/2018+ Crosstrek for street, show, drag racing, auto-x, or road racing, a quality, functional, and stylish tow hook is a must-have! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.

This Part Fits:

Year	Make	Model	Submodel
2018-2024	Subaru	Crosstrek	Base
2019-2023	Subaru	Crosstrek	Hybrid
2018-2025	Subaru	Crosstrek	Limited
2018-2025	Subaru	Crosstrek	Premium
2021-2025	Subaru	Crosstrek	Sport
2024-2025	Subaru	Crosstrek	Wilderness
2022-2024	Subaru	WRX	Base
2022-2024	Subaru	WRX	GT
2022-2024	Subaru	WRX	Limited
2022-2024	Subaru	WRX	Premium
2024	Subaru	WRX	TR

The all-new 2023+ Nissan Z is a sleek showstopper. What’s not-so sleek? Its front license plate location. Sitting directly in the center of the grille, the front plate obstructs air flow to the radiator while also creating wind resistance. Luckily, there’s no need to worry about drilling holes in your new bumper because Mishimoto has a solution: the 2023+ Nissan Z Mishimoto license plate relocation kit!----Designed specifically for the 2023+ Nissan Z, our license plate relocation kit is constructed from high-strength, anodized and powder coated 6061-aluminum. It mounts directly to the OEM tow hook location, allowing for a clean and seamless installation. Angling and relocating the plate to the side not only helps reduce wind resistance, but it also frees up grille space, facilitating critical airflow to your radiator and letting your Z breathe easy. And let’s be honest, it just looks better! The days of ugly holes in your bumper are no more. Our license plate relocation kit includes all necessary hardware for an easy installation, and as with all our products, this kit includes our signature Mishimoto Lifetime Warranty.

This Part Fits:

Year	Make	Model	Submodel
2024-2025	Nissan	Z	Nismo
2023-2025	Nissan	Z	Performance
2023	Nissan	Z	Proto Spec
2023-2025	Nissan	Z	Sport

The 2023+ Nissan Z was built to tackle the road and the track. But, even under the most experienced right foot, 400 HP can sometimes get a little squirrelly. Whether you're planning on playing chicken with a gravel trap at the end of turn one, or bombing some back roads in your Z, the Mishimoto Racing Tow Hook is a perfect addition to your ride!----Stylish and functional, our tow hook is available in six unique colors to match any build and are crafted from high-strength 7075 aluminum and 304 stainless-steel. But don’t be mistaken, we designed this tow hook to be a bona fide race-ready and fully functional piece of race equipment.----With a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, it meets or exceeds requirements for racing series’ such as SCCA, NASA, and CCA. We even include tow hook indication arrow stickers! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.

This Part Fits:

Year	Make	Model	Submodel
2023	Nissan	Z	Performance
2023	Nissan	Z	Proto Spec
2023	Nissan	Z	Sport

"Mishimoto has developed a performance air intake engineered specifically for the 1999--2005 BMW E46 323i/325i/328i. This intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under load, and the free-flowing design amplifies engine induction sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes a steel heatshield with pre-assembled rubber trim to keep hot engine air out and help draw cold outside air into the filter. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This performance air intake kit is also fully functional with our silicone intake hoses as well. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship."

This Part Fits:

Year	Make	Model	Submodel
2000	BMW	323Ci	Base
1999-2000	BMW	323i	Base
1999	BMW	323is	Base
2001-2006	BMW	325Ci	Base
2001-2005	BMW	325i	Base
2001-2005	BMW	325xi	Base
2000	BMW	328Ci	Base
1999-2000	BMW	328i	Base
1999	BMW	328is	Base

Mishimoto has developed a performance air intake engineered specifically for the 2012+ BMW F30 w/ N20/N26 engines! This Performance Air Intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the Mishimoto High-Flow Oiled Air Filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox is made from 5052 aluminum with a black powder-coated finish to reduce weight compared to a steel intake box, and to prevent against any corrosion. The airbox also protects against engine bay heat-soak, and it provides a unique engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2012	BMW	328i	Base

Mishimoto has developed a performance air intake engineered specifically for the 2012+ BMW F30 w/ N20/N26 engines! This Performance Air Intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the Mishimoto High-Flow Oiled Air Filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox is made from 5052 aluminum with a black powder-coated finish to reduce weight compared to a steel intake box, and to prevent against any corrosion. The airbox also protects against engine bay heat-soak, and it provides a unique engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

This Part Fits:

Year	Make	Model	Submodel
2012	BMW	328i	Base

Dress up the front of your vehicle with Mishimoto's new License Plate Delete. Replace those un-used empty holes with our anodized black aluminum cover. To suit your taste, this product comes with two different logo styles to show off your Mishimoto pride! This license plate delete features a rubber gasket to protect the paint as the cover is installed. So you can transfer this to several vehicles as well! The Mishimoto license plate delete also features self-securing rubber well nuts to guarantee an easy and clean installation! As with all our products this radiator stay set includes the Mishimoto Lifetime Warranty.

More and more vehicles are being sold with a 'sound symposer' system on their engines. This basically pumps engine noise into the cabin of the vehicle so the driver can experience the sound and rush of the engine accelerating under load. However, some customers choose not to have this sometimes obtrusive noise constantly being drawn into their car. Some people have come up with quick and easy solutions to remove this system. Mishimoto has developed a system that fits a variety of vehicles. The system features an aluminum CNC plug with a Mishimoto logo to place in the intake hose as well a rubber cap to install onto the sound diaphragm. Installation is a snap and will take about 10 minutes to complete. Now you can enjoy a quieter ride!

This Part Fits:

Year	Make	Model	Submodel
2013-2016	Scion	FR-S	Base
2014-2020	Subaru	BRZ	Limited
2013-2019	Subaru	BRZ	Premium
2015	Subaru	BRZ	Series.Blue
2019	Subaru	BRZ	Series.Gray
2016	Subaru	BRZ	Series.HyperBlue
2017	Subaru	BRZ	Series.Yellow
2018,2020	Subaru	BRZ	TS
2015	Subaru	WRX STI	Base
2015	Subaru	WRX STI	Launch Edition
2015	Subaru	WRX STI	Limited
2017-2020	Toyota	86	Base

This RIGID A-Pillar mount kit is designed specifically for the 2010-2020 Toyota 4Runner and allows for a clean install of RIGIDs high output LED lighting. These A-Pillar mounts can accommodate many RIGID lights including 4 in. 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro and Radiance Pods. All of RIGIDs grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.

This Part Fits:

Year	Make	Model	Submodel
2010-2020	Toyota	4Runner	Limited
2020	Toyota	4Runner	Nightshade
2010-2020	Toyota	4Runner	SR5
2018-2020	Toyota	4Runner	SR5 Premium
2010-2016	Toyota	4Runner	Trail
2017-2020	Toyota	4Runner	TRD Off-Road
2018-2020	Toyota	4Runner	TRD Off-Road Premium
2015-2020	Toyota	4Runner	TRD Pro
2020	Toyota	4Runner	Venture